After my last post, I took a short brake, but now I’m refreshed and at it again. We are in the final stretch of the multi purpose cabinet and next time I hope to have it ready to install in the (cargo) van conversion. Meanwhile, to prevent any noise made by the cooktop cover while… Continue reading Multi-Use Cabinet (8)
Tag: workshop
Multi-Use Cabinet (4)
Back Panel After the plywood core, the cherry frame and the decorations, I now turn to the back panel of the cabinet. In its up-position, it covers and protects the drawers section, while in the down-position it functions as a side table when sitting outside the van, with the side doors of the cargo… Continue reading Multi-Use Cabinet (4)
Multi-Use Cabinet (3)
Fitting the cabinet in the van The RV’s cabinet overhangs the step-in area at the side doors. A simple box with a Cherry front will fill that in. The extension at the top of the will cover the end of the core bottom panel. As we are approaching glue-up, it’s time to check… Continue reading Multi-Use Cabinet (3)
Multi-Use Cabinet (1)
Prepare Decorative Strips Its fan-like body is prone to breaking, which necessitates a dense wood. I chose hard maple, just because I had a piece laying around. The other van cabinets that I will be building in the next few months, will carry the same decoration, so to hurry things up, I’ll make them all… Continue reading Multi-Use Cabinet (1)
Additional Rear Door Cabinet
Additional storage space is highly appreciated in my camper, even as small as this little door cabinet. A RV has never enough! As with the other door, I’ll have to find some Cherry and do the assembly in my workshop. I follow the same procedure as the main cabinet that I just finished. I… Continue reading Additional Rear Door Cabinet
Rear Door Cabinetry
Creating the rear door cabinets is the next step in my van conversion. They will add extra storage space, of which every little bit counts in a RV. It involves mostly simple woodworking, so I’ll be heading back to my workshop. First the driver’s side rear door. The red line in the photo indicates the… Continue reading Rear Door Cabinetry
Pull-out shelf (final)
In my previous postings (Pull-out bed shelf and Pull-out shelf (2)) I built the shelf in my workshop; now I head out to the van, to make some final measurements, adjust it and finish the last details. Two issues remain: the front of the shelf needs to be shortened and finished with cherry and secondly… Continue reading Pull-out shelf (final)
Pull-out shelf (2)
In my previous post I glued the panel. Now I’ll continue with the cherry frame. The frame I start with a 2″ thick board that I cut down to the approximate size of the wood that is needed for the two side pieces. The lumber is set aside for a minimum of 24 hours. This… Continue reading Pull-out shelf (2)